A Henry Vegetative Roofing Assembly™ (VRA) is built upon its proven 790-11 hot-rubberized waterproofing membrane. A Henry VRA comes with a Single-Source Warranty covering the complete job, from its waterproofing membrane to the vegetation. So you can have the confidence that your roof is protected by a stable and financially secure company that will be there down the road.
Roofing - Underlayment
Grip-Rite
Roofing Products
Grip-Rite coatings and sealants offer maximum protection designed to repair, seal, bond, coat or patch any roof project. Grip-Rite ShingleLayment is the only roofing…
Subcategory:
Roof Cements, Underlayment & Sheathing
or Give us a Call
Product Summary
Grip-Rite coatings and sealants are made by the top coating manufacturers so you can depend on them for durability and strength, even in the toughest weather conditions.
Grip-Rite ShingleLayment synthetic underlayment is a water shedding device designed to reduce the occurrence of leaks caused by wind driven rain penetrating primary roof coverings, and as temporary cover on exposed roof system.
Grip-Rite® modified bitumen membranes are manufactured from formulas using only the highest quality materials, and meet or exceed, industry standards for standard performance modified bitumen membranes.
Powered by Gemini
Construction and Materials
The Grip-Rite product falls under the Roofing category, specifically within Underlayment & Sheathing and Roof Cements.
Based on the provided context, Grip-Rite is a brand of Grip-Rite. Their products are found in the Roofing sector, offering solutions for underlayment, sheathing, and roof cements.
Detailed construction and material information for specific Grip-Rite products is not available within the provided context. However, as a brand specializing in roofing materials, Grip-Rite products are generally designed to provide protection, durability, and performance in various roofing applications.
Roofing underlayments are typically made from materials such as:
- Felt paper (asphalt-saturated felt)
- Synthetic materials (woven or non-woven polypropylene or polyethylene)
- Rubberized asphalt
These materials are chosen for their ability to:
- Provide a secondary barrier against water penetration.
- Protect the roof deck from moisture during installation.
- Offer slip resistance for roofers.
- Enhance the longevity of the roofing system.
Roof sheathing, often made of:
- Oriented Strand Board (OSB)
- Plywood
serves as the structural base for the roofing materials, providing a solid surface for attachment.
Roof cements, used for sealing and repair, are typically composed of:
- Asphalt or bitumen-based compounds
- Fillers
- Solvents or petroleum distillates
These are formulated to provide a waterproof seal for flashing, vents, and other roof penetrations.
Features and Benefits
Grip-Rite offers a comprehensive range of roofing solutions designed to provide superior protection and durability for your projects. Focusing on underlayment, sheathing, and roof cements, Grip-Rite products are engineered to meet the demands of professional roofing applications.
Grip-Rite Roofing Underlayment & Sheathing
Grip-Rite underlayment and sheathing products form the foundational layer of a robust roofing system, ensuring long-lasting performance and weather resistance. These materials are crucial for creating a stable and protected roof deck that can withstand the elements.
- Enhanced Water Resistance: Designed to act as a critical secondary barrier against water intrusion, protecting the roof deck and the structure below from leaks caused by wind-driven rain or ice dams.
- Durability and Strength: Provides a stable and uniform surface for shingle application, contributing to the overall structural integrity of the roof.
- Ease of Installation: Engineered for efficient and straightforward installation, saving valuable time on job sites.
- Compatibility: Works seamlessly with a wide variety of roofing materials, including asphalt shingles, metal roofing, and other common roofing types.
Grip-Rite Roof Cements
Grip-Rite roof cements are formulated to provide powerful adhesion and sealing capabilities, essential for repairs and installations that require a durable, weather-tight bond. These cements are vital for sealing joints, flashing, and other critical areas prone to leaks.
- Superior Adhesion: Creates a strong and lasting bond on a wide range of roofing materials, ensuring that repairs and installations remain secure.
- Excellent Weatherproofing: Offers robust protection against water, UV rays, and temperature fluctuations, preventing deterioration and maintaining seal integrity.
- Versatile Applications: Suitable for various roofing tasks, including sealing nail heads, patching small holes, and adhering flashing and underlayment.
- Professional-Grade Performance: Developed for the demanding requirements of professional roofers, ensuring reliable and long-term results.
Core Advantages of Grip-Rite Roofing Products:
- System Approach: Grip-Rite offers integrated solutions for roofing, where underlayment, sheathing, and cements work together to create a complete and reliable roofing system.
- Quality and Reliability: Manufactured with a commitment to quality, ensuring that each product performs as expected and contributes to the longevity of the roof.
- Job Site Efficiency: Products are designed with the professional installer in mind, focusing on ease of use and quick application to maximize productivity.
- Protective Barrier: All Grip-Rite roofing products contribute to forming a critical barrier against moisture and environmental damage, safeguarding the building's structure.
Options-Styles
Grip-Rite offers a range of roofing products designed to provide secure and durable solutions for your construction needs. Their offerings span underlayment, sheathing, and roof cements, ensuring comprehensive coverage for various roofing applications.
Within the underlayment and sheathing categories, Grip-Rite focuses on providing materials that create a solid foundation for your roofing system. These products are engineered for performance, offering protection against the elements and contributing to the overall longevity of the roof.
Grip-Rite's roof cements are formulated to deliver strong adhesion and weather resistance. These cements are essential for sealing joints, repairing damage, and ensuring watertight integrity of the roofing structure. The product line is developed with the professional contractor in mind, prioritizing ease of application and reliable results.
While specific product lines and their detailed specifications are not provided in the context, Grip-Rite's presence in the roofing market indicates a commitment to supplying essential materials for both new construction and repair projects. Their focus on underlayment, sheathing, and roof cements suggests a product selection aimed at addressing critical aspects of roof installation and maintenance.
- Homepage
- Products
- Warranty
- About Us
- Video
- Product Availability and Pricing Click here for details
-
Similar Products
- See all our Roofing products.
Henry Company
Roofing
Trust Henry for all your roofing needs. Backed by more than 80 years of continuous building product improvements.
Subcategory:
Coating, Green Roofing, Roofing Elastomeric, Underlayment & Sheathing
or Give us a Call
Product Summary
Quality roof protection doesn’t start with the roofing surface - it starts underneath. In cold climates, Henry residential roofing products can guard against damage from ice dams, or provide a vapor-proof barrier. In hurricane or tornado-prone areas, Henry roofing products can prevent interior damage from wind-driven rain, or help roofing tiles stay firmly adhered to the roof deck. In hot climates, Henry products can combat the damaging effects of the sun and excessive heat.
Powered by Gemini
Construction and Materials
Henry Company offers a range of roofing solutions designed for performance and durability. Their product lines encompass coatings, elastomeric roofing, underlayment and sheathing, and green roofing systems. These products are engineered to protect structures from the elements, enhance energy efficiency, and contribute to sustainable building practices.
Roofing Coatings
- Henry Company's roofing coatings are formulated to provide a protective barrier against UV radiation, extreme temperatures, and moisture. These coatings are designed to extend the lifespan of existing roof systems and can offer improved reflectivity to reduce heat absorption. The materials used in these coatings typically include acrylics, silicones, or asphalt-based compounds, often enhanced with ceramic microspheres or other specialized additives for improved performance. Application methods vary, but commonly include spraying, rolling, or brushing.
Roofing Elastomerics
- Elastomeric roofing products from Henry Company are known for their flexibility and ability to withstand movement and expansion/contraction of the roof substrate. These systems create a seamless, waterproof membrane that is resistant to cracking and ponding water. The primary materials in elastomeric systems are typically high-solids acrylic latex polymers that cure to form a durable, flexible film. They are often applied as a liquid-applied membrane, which can conform to complex roof shapes and details.
Underlayment & Sheathing
- Underlayment and sheathing products are crucial components of a robust roofing system, providing a secondary layer of protection and structural support. Henry Company's offerings in this category are designed to work in conjunction with primary roofing materials. These products can include synthetic underlayments, asphalt-saturated felts, or sheathing panels. Materials often consist of woven or non-woven synthetic fabrics, fiberglass mats, or paper-based materials treated for water resistance. Their primary function is to create a barrier against moisture penetration and to provide a stable deck for the installation of shingles, tiles, or other roofing materials.
Green Roofing
- Henry Company's green roofing solutions are developed with environmental sustainability in mind. These systems are designed to support vegetation growth, manage stormwater, and improve building insulation. The construction of these systems involves multiple layers, including waterproofing membranes, drainage layers, growing media, and vegetation. The waterproofing membranes are critical for preventing water intrusion into the building structure. Materials used in green roofing systems are chosen for their durability, root resistance, and ability to support plant life.
Features and Benefits
Henry Company Roofing Solutions
Henry Company offers a comprehensive range of roofing solutions designed to protect and enhance your building's exterior. Their expertise spans critical areas of roofing, including advanced coatings, high-performance elastomeric systems, reliable underlayment and sheathing, and innovative green roofing options.Roofing Coatings
Henry Company's roofing coatings are engineered to provide superior protection against the elements, extending the lifespan of existing roof systems. These coatings are formulated to offer:
- Enhanced Durability: Resists weathering, UV degradation, and environmental factors.
- Waterproofing: Creates a seamless, monolithic barrier to prevent leaks and water intrusion.
- Reflectivity: Many coatings are designed to reflect solar radiation, reducing building cooling costs and improving energy efficiency.
- Versatility: Suitable for a wide array of roof substrates, including metal, asphalt, built-up roofs, and single-ply membranes.
Core Advantages: Investing in Henry Company roofing coatings means protecting your asset from costly damage, reducing energy consumption, and prolonging the life of your roof structure.
Roofing Elastomeric
The elastomeric roofing systems from Henry Company provide a flexible and durable solution for various roofing needs. These systems are known for their ability to:
- Adhere to Movement: The inherent elasticity allows the material to expand and contract with temperature changes without cracking or splitting.
- Withstand Extremes: Offers exceptional performance in a wide range of temperatures and weather conditions.
- Seamless Application: Forms a continuous, waterproof membrane, minimizing the risk of seams failing.
- Restoration and New Construction: Ideal for both repairing and rejuvenating existing roofs and as a primary roofing system for new projects.
Core Advantages: Henry Company's elastomeric solutions offer unparalleled flexibility and weather resistance, providing a long-lasting, leak-free barrier for your building.
Underlayment & Sheathing
Underlayment and sheathing are the foundational layers of a robust roofing system, and Henry Company provides high-quality materials to ensure optimal performance. Their products in this category are designed to:
- Provide a Dry Belt: Acts as a secondary barrier against moisture penetration, protecting the roof deck.
- Enhance Roof Integrity: Contributes to the overall structural stability and wind resistance of the roofing system.
- Compatibility: Designed to work seamlessly with a variety of roofing materials and systems.
- Ease of Installation: Contributes to efficient and reliable installation processes.
Core Advantages: The underlayment and sheathing products from Henry Company are essential for building a durable and weather-tight roof structure from the ground up.
Green Roofing
Embracing sustainability, Henry Company offers innovative green roofing solutions. These systems contribute to environmental benefits and building performance by:
- Managing Stormwater: Helps to absorb and filter rainwater, reducing runoff and the burden on urban drainage systems.
- Improving Insulation: Adds thermal mass, contributing to better building insulation and reduced heating and cooling loads.
- Extending Roof Life: The vegetative layer can protect the underlying waterproofing membrane from UV radiation and extreme temperature fluctuations.
- Creating Usable Space: Can transform rooftops into functional spaces for recreation or urban agriculture.
Core Advantages: Henry Company's green roofing options promote environmental responsibility, enhance building energy efficiency, and contribute to a more sustainable built environment.
Options-Styles
Henry Company offers a robust selection of roofing solutions designed to protect and enhance various roof systems. Their product lines encompass a range of coatings, elastomeric roofing membranes, underlayment and sheathing materials, and specialized green roofing components. Each category is engineered to address specific performance needs, from weatherproofing and energy efficiency to structural integrity and environmental sustainability.
The Style and options within the Henry Company portfolio are characterized by innovation, durability, and a commitment to performance. They cater to both commercial and residential applications, providing professionals with reliable products that meet rigorous industry standards.
Roofing Coatings
Henry Company's roofing coatings are formulated to provide a protective, weather-resistant layer over existing roof surfaces. These coatings are designed to extend the lifespan of roofs, reduce maintenance costs, and improve energy efficiency by reflecting solar radiation.
- Acrylic Coatings: Offer excellent UV resistance and flexibility, suitable for a variety of roof substrates.
- Silicone Coatings: Known for their superior waterproofing capabilities and resistance to ponding water, providing long-term durability.
- Asphalt Emulsion Coatings: Provide a cost-effective solution for waterproofing and protection, often used in conjunction with reinforcing fabrics.
- Elastomeric Coatings: Feature high elongation properties, allowing them to move with the roof during temperature fluctuations without cracking.
Roofing Elastomeric
Elastomeric roofing membranes from Henry Company are seamless, monolithic systems that create a continuous waterproof barrier. These systems are known for their exceptional flexibility and elongation, enabling them to withstand extreme weather conditions and building movement.
- Liquid-Applied Membranes: Applied in liquid form and cure to form a seamless rubber-like layer. Available in various chemistries including acrylic, silicone, and polyurethane.
- Reinforced Systems: Often used in conjunction with polyester or fiberglass reinforcement fabrics to enhance tensile strength and puncture resistance.
Underlayment & Sheathing
Henry Company's underlayment and sheathing products are critical components for building a strong and weather-tight roof deck. They provide an essential layer of protection beneath the primary roofing material.
- Felt Underlayments: Traditional asphalt-saturated felt papers offering a cost-effective water-resistant barrier.
- Synthetic Underlayments: Lightweight, durable, and more resistant to moisture than felt, providing superior protection and ease of installation.
- Rigid Insulation Boards: Offer thermal insulation properties and a stable substrate for roofing systems.
- Sheathing Panels: Provide structural integrity to the roof deck.
Green Roofing
The green roofing solutions offered by Henry Company are designed to support the development of vegetated roofs, which provide a multitude of environmental benefits.
- Root Barrier Systems: Prevent plant roots from penetrating and damaging the waterproofing membrane.
- Drainage Composites: Facilitate efficient water drainage from the vegetated roof, preventing waterlogging.
- Water Retention Layers: Help retain moisture for plant life, reducing irrigation needs.
- Protection Mats: Safeguard the waterproofing membrane during the installation of the green roof system.
The product options within each of these categories allow for customization to meet specific project requirements, climate considerations, and performance expectations. Henry Company's approach to roofing solutions emphasizes a comprehensive system of products designed for integrated performance.
- Homepage
- Products
- Warranty
- About Us
- Video
-
Green - Environmental
- Product Availability and Pricing Click here for details
-
Similar Products
- See all our Roofing products.
IKO
Roofing Shingles & Underlayments
IKO’s Shingles are created using the industry’s most advanced technology and selected by consumers who demand the best in terms of quality, durability, and value.
Subcategory:
Shingles, Underlayment & Sheathing
Material:
Fiberglass
Type:
3-Tab, Architectural
or Give us a Call
Product Summary
IKO’s Shingles are created using the industry’s most advanced technology and selected by consumers who demand the best in terms of quality, durability, and value. IKO’s Royal Estate shingles boast a range of subtle color variations that evoke the look of true slate. Cambridge shingles by IKO combine extraordinary shake-like design with superior protection making them a time-tested favorite. IKO’s Marathon 3-tab shingles are built right with solid construction and weather-resistant design.
Shingles along are sometimes not enough to protect your home so IKO has developed a superior multi-layered roofing system incorporating our industry-leading accessory products. Along with IKO’s quality shingles, your Pro 4 Systems includes: Ice and Water Protector; Underlayment; Roof Starters; Ridge Cap Shingles.
Powered by Gemini
Construction and Materials
IKO Industries Ltd. offers a comprehensive range of roofing products, primarily focusing on underlayment, sheathing, and shingles. These materials are designed to provide a durable, weather-resistant, and aesthetically pleasing roofing system for residential and commercial applications.
Shingles:
- IKO shingles are engineered with multiple layers of asphalt and reinforcing materials to ensure longevity and performance.
- The primary components include a fiberglass mat or organic felt base, which provides structural integrity.
- This base is then saturated with asphalt, a waterproofing agent, and coated with mineral granules on the surface.
- These granules serve multiple purposes: they protect the asphalt from UV degradation, provide color and aesthetic appeal, and enhance fire resistance.
- IKO offers a variety of shingle styles, including architectural (dimensional) shingles, which are designed to mimic the look of natural materials like wood shakes or slate, and 3-tab shingles, known for their simpler design and cost-effectiveness.
- Architectural shingles are constructed with two or more layers of material laminated together, creating a thicker, more dimensional profile.
- Features such as advanced sealant strips are incorporated to provide strong adhesion and wind resistance.
Underlayment:
- IKO's underlayment products are crucial components of a roofing system, providing a secondary layer of protection against water intrusion.
- Common materials used in IKO underlayments include synthetic fabrics and asphalt-saturated felts.
- Synthetic underlayments are typically made from woven or non-woven polypropylene or polyester, offering excellent tear strength, water resistance, and breathability.
- Asphalt-saturated felts, often made from fiberglass or organic fibers, are treated with asphalt to enhance their waterproofing capabilities.
- These underlayments are installed directly on the roof deck before the shingles are applied, acting as a barrier against wind-driven rain and ice dams.
Sheathing:
- While IKO's primary focus is on shingles and underlayment, the integrity of the roof system relies on proper sheathing.
- Roof sheathing, typically made of oriented strand board (OSB) or plywood, forms the structural base to which the underlayment and shingles are attached.
- These materials provide a solid surface and transfer roof loads to the building's framing.
The construction of an IKO roofing system emphasizes the synergy between these components. The sheathing provides the foundation, the underlayment offers a critical waterproof barrier, and the shingles deliver the primary defense against the elements, providing both protection and curb appeal.
Features and Benefits
IKO offers a comprehensive range of roofing solutions designed to protect and enhance your home. From robust underlayment and sheathing to a wide selection of durable shingles, IKO provides the essential components for a superior roofing system.
IKO Roofing Underlayment & Sheathing: The Foundation of Protection
IKO's underlayment and sheathing products form the critical base layer of your roof, providing an essential barrier against water infiltration and ensuring the longevity of your entire roofing system. These products are engineered for performance and reliability, offering peace of mind in various weather conditions.
- Enhanced Water Resistance: Underlayment acts as a secondary water-shedding layer, preventing moisture from reaching your roof deck and home's interior.
- Deck Protection: Sheathing provides a solid and stable surface for shingle installation, contributing to the structural integrity of the roof.
- Durability: Made with high-quality materials, IKO underlayment and sheathing are built to withstand the elements and the rigors of installation.
- Ease of Installation: Designed for straightforward application, these products contribute to efficient project timelines.
IKO Shingles: Style Meets Substance
IKO shingles are the visible face of your roof, offering a vast array of styles, colors, and textures to complement any architectural design. Beyond aesthetics, IKO shingles are engineered for exceptional durability, weather resistance, and long-term performance.
- Extensive Style Selection: Choose from a diverse palette of colors and profiles, including architectural shingles, designer shingles, and traditional 3-tab shingles, to achieve your desired look.
- Superior Weather Protection: IKO shingles are designed to withstand wind, rain, hail, and UV exposure, providing reliable protection season after season.
- Longevity and Durability: Constructed with high-quality materials and advanced manufacturing techniques, IKO shingles are built for a long service life.
- Energy Efficiency Options: Select IKO shingles with cool roofing technology to help reduce heat absorption, potentially lowering cooling costs.
- Enhanced Wind Resistance: Many IKO shingle lines offer enhanced wind performance, providing greater security against storm damage.
Core Advantages of IKO Roofing Products:
- Comprehensive System Approach: IKO offers a complete range of integrated roofing components, ensuring compatibility and optimal performance from underlayment to shingles. This holistic approach provides a more robust and reliable roof.
- Commitment to Quality: IKO is dedicated to producing high-quality roofing materials that are rigorously tested to meet demanding industry standards. This focus on quality translates to dependable performance and extended roof life.
- Variety and Aesthetics: IKO provides an extensive selection of styles and colors, allowing homeowners to customize their roof to perfectly match their home's exterior and personal taste.
- Proven Durability: IKO roofing products are engineered to endure harsh weather conditions, offering long-term protection and value for your investment.
Options-Styles
IKO Industries Ltd. offers a diverse range of roofing products designed for both residential and commercial applications. Their product lines encompass underlayment, sheathing, and a variety of asphalt shingles, catering to different aesthetic preferences and performance needs.
Underlayment and Sheathing
IKO provides underlayment solutions that act as a critical secondary barrier against water infiltration, protecting the roof deck from moisture. These products are engineered for durability and ease of installation, contributing to the overall integrity of the roofing system.
Shingle Styles and Options
IKO's asphalt shingles are available in a wide array of styles, colors, and profiles, allowing for customization to match any architectural design. The product offerings typically include:
- Architectural Shingles: These are designed to mimic the look of natural materials like wood shakes or slate, offering enhanced visual depth and curb appeal. They are constructed with multiple layers for added dimension and durability.
- 3-Tab Shingles: A more traditional and economical option, these shingles provide a clean, uniform appearance and are known for their reliability and performance.
- Specialty Shingles: IKO may also offer specialty shingles that provide enhanced features such as increased impact resistance or superior wind performance, designed for specific climate challenges or aesthetic requirements.
Color Palettes
The color selection for IKO shingles is extensive, ranging from classic neutrals like charcoal gray, brown, and black to more vibrant earth tones and subtle blends. This allows homeowners and builders to achieve the desired look for their property. Specific color names and availability may vary across different product lines.
Performance Features
IKO products are often designed with performance in mind, incorporating features that enhance:
- Durability: Shingles are constructed with robust materials and manufacturing processes to withstand various weather conditions.
- Wind Resistance: Many shingle lines are rated for high wind speeds, offering protection against uplift and damage.
- Algae Resistance: Some products incorporate technology to help prevent the growth of algae, maintaining the roof's appearance over time.
- Fire Resistance: Shingles may offer various fire ratings, contributing to the safety of the building.
Warranty Information
IKO typically provides limited warranties on their roofing products, with terms varying based on the specific shingle line and coverage. These warranties are designed to offer peace of mind regarding the material's performance and longevity.
- Homepage
- Products
- Accessories
- Ideas, Tips & Tools
- Instructions
- Warranty
- About Us
- General Information
- Video
- Product Availability and Pricing Click here for details
-
Similar Products
- See all our Roofing products.
Owens Corning - Roof - Underlayment
Roofing Underlayment
For a roof to last, your roofing system must include protection from wind-driven rain.
Subcategory:
Underlayment & Sheathing
or Give us a Call
Product Summary
For a roof to last, your roofing system must include protection from wind-driven rain. This is accomplished by installing waterproofing underlayment directly beneath the shingles. WeatherLock® Series self-adhesive water-proofing underlayment is perfect for both new construction and reroofing projects. In addition to protecting the roof deck from damage from ice dams and wind-driven rain, WeatherLock should also be used on areas of the roof where water has a tendency to collect or flow. Valleys, vents, chimneys and skylights are examples of where WeatherLock Series underlayment should be considered.
Powered by Gemini
Construction and Materials
Owens Corning offers a range of underlayment products designed to provide a critical secondary barrier against water infiltration beneath primary roofing materials. These underlayments are engineered to work in conjunction with shingles and other roofing systems, offering enhanced protection and longevity for the roof deck and building structure.
The construction of Owens Corning underlayments typically involves a durable reinforcing mat or fabric, which is then saturated and/or coated with specific asphalt formulations. This construction provides both strength and water-resistant properties. The specific materials and manufacturing processes vary depending on the product type, with options designed for different climates, exposure levels, and installation methods.
Key materials commonly found in Owens Corning underlayments include:
- Reinforcing Scrim/Mat: Often made from polyester or fiberglass, this provides tensile strength and dimensional stability, preventing tearing and stretching during installation and under roof stress.
- Asphaltic Coating: Specially formulated asphalt provides the primary waterproofing layer. This coating is designed for flexibility, adhesion, and resistance to degradation from UV exposure and temperature fluctuations.
- Mineral Granules (on some products): Some underlayments may incorporate mineral granules on the surface to improve slip resistance for installers and provide additional UV protection.
- Surface Treatments: Proprietary treatments can be applied to enhance grip and facilitate overlap sealing during installation.
Owens Corning offers several types of underlayment solutions, each with specific characteristics:
- Synthetic Underlayments: These are engineered products that utilize advanced polymers and reinforcing fabrics. They are known for being lightweight, strong, and resistant to moisture and rot. Their construction often involves multiple layers of polymeric film and woven or non-woven reinforcing materials.
- Felt Underlayments: Traditionally made from asphalt-saturated felt, these underlayments offer reliable water resistance. The felt base provides a strong absorbent layer, while the asphalt saturation creates the waterproofing barrier.
- High-Temperature Underlayments: Designed for use in areas with high ambient temperatures or with roofing materials that generate significant heat, these underlayments are formulated to maintain their integrity and performance at elevated temperatures without softening or degrading.
The construction of these underlayments emphasizes ease of installation, durability, and long-term performance. Features such as pre-printed guidelines for overlap and fastening can be incorporated to ensure proper installation and optimal water-shedding capabilities. The specific combination of materials and manufacturing techniques ensures that Owens Corning underlayments meet industry standards for fire resistance and wind uplift, contributing to the overall integrity and safety of the roof system.
Features and Benefits
Owens Corning, a trusted name in roofing solutions, offers a comprehensive range of underlayment products designed to provide a critical secondary barrier against water infiltration, protecting your home's structure and extending the life of your roofing system. These underlayments are engineered to work seamlessly with Owens Corning roofing shingles and other roofing components, ensuring optimal performance and long-term durability.
Features and Benefits
- Enhanced Water Protection: Owens Corning underlayments create a robust secondary barrier that shields your roof deck from moisture that may penetrate the primary roofing material, such as during extreme weather events or ice damming. This protection is crucial for preventing rot, mold, and structural damage to your home.
- Durability and Longevity: Crafted with high-quality materials, these underlayments are designed to withstand the harsh elements for years to come. They resist tearing, puncturing, and degradation, ensuring they maintain their protective integrity throughout the lifespan of your roof.
- Ease of Installation: Owens Corning underlayments are designed for straightforward and efficient installation by roofing professionals. This can lead to reduced labor costs and a quicker project completion time.
- Compatibility: Engineered to be fully compatible with Owens Corning's complete line of roofing shingles and accessories, these underlayments ensure a unified and high-performing roofing system. This integrated approach minimizes the risk of system failures.
- Variety of Options: Owens Corning provides a selection of underlayment types to meet specific project needs and budget considerations. This includes both traditional felt underlayments and advanced synthetic options, each offering distinct advantages.
Core Advantages
- Superior Moisture Management: The primary advantage of Owens Corning underlayments lies in their ability to effectively manage and repel water, safeguarding your home's most valuable asset.
- System Integrity: By choosing Owens Corning underlayment, you are investing in a compatible and integrated roofing system. This synergy between components is key to achieving optimal performance and longevity.
- Trusted Brand Assurance: Owens Corning is a leader in the roofing industry, known for its commitment to quality and innovation. Their underlayments benefit from decades of research and development, providing homeowners with peace of mind.
Options-Styles
Owens Corning offers a range of underlayment products designed to provide a critical secondary layer of protection beneath your roofing shingles. These underlayments play a vital role in safeguarding your home from water intrusion in the event that shingles are damaged or blown off by wind, as well as providing enhanced protection against ice damming in colder climates. They also create a smooth, clean surface for shingle installation, contributing to a more aesthetically pleasing and longer-lasting roof system.
The style of Owens Corning underlayments generally falls into two primary categories, catering to different performance needs and installation preferences:
- Felt Underlayment: This is a traditional and cost-effective option. It's typically made from asphalt-saturated felt paper, offering reliable water resistance. Felt underlayment is known for its ease of installation and familiarity among roofing professionals.
- Synthetic Underlayment: Representing a more modern and advanced solution, synthetic underlayments are engineered from polymer-based materials. These products are generally lighter, stronger, and more resistant to tearing than felt. They often offer superior water holdout and can provide enhanced UV resistance before shingle installation. Many synthetic options also feature improved slip resistance, aiding in worker safety during installation.
Owens Corning provides specific underlayment products within these styles, each with its own set of features and benefits. While specific product names and detailed technical specifications can vary and are best consulted directly for the most up-to-date information, the general options available typically include:
- Standard Felt Underlayment: Designed for general-purpose use, offering a good balance of protection and value.
- High-Temperature Felt Underlayment: Formulated to withstand the higher temperatures often found under dark-colored shingles, preventing degradation and maintaining its protective properties.
- Synthetic Underlayment Options: These can range from general-purpose synthetic underlayments to specialized products designed for enhanced durability, superior water resistance, and increased tear strength. Some may also offer specific features like enhanced grip surfaces.
When selecting an Owens Corning underlayment, considerations such as local climate, the type of shingles being installed, building codes, and project budget will influence the best choice. Each underlayment is engineered to work seamlessly with Owens Corning roofing systems, contributing to the overall integrity and longevity of your roof.
- Homepage
- Products
- Warranty
- About Us
- General Information
- Video
-
Green - Environmental
- Product Availability and Pricing Click here for details
-
Similar Products
- See all our Roofing products.
Perma "R" Products
Profelt Roof Underlayments
PROFELT PLUS® and PROFELT 30® GENERAL - Perma “R” Products synthetic roof underlayments are designed to replace and outperform traditional asphalt felts.…
Subcategory:
Underlayment & Sheathing
or Give us a Call
Product Summary
ProFelt Plus and ProFelt 30 synthetic roof underlayments deliver exceptional weather barrier performance, coated on both sides with a proprietary rubberized polyolefin slip resistant coating offering an unsurpassed level of slide resistance. Custom logo available upon request.
- Non-woven, durable, lightweight synthetic roof underlayment
- ≤1 permeability for superior moisture resistance and protection against water infiltration
- Improved UV Resistance; ProFelt Plus - 90 days, ProFelt 30 - 120 days
- For use under asphalt, synthetic, metal, tile, and shake shingles
- Products in compliance with the Florida Building Code 7th Edition (2020)
- Limited 30-year warranty
Powered by Gemini
Construction and Materials
Perma "R" Products, a leader in roofing underlayment and sheathing solutions, offers a range of innovative products designed to enhance the performance and longevity of your roof system. Their commitment to quality construction and advanced material selection ensures superior protection against the elements.
The construction of Perma "R" Products' offerings is centered on creating robust, multi-layered systems that provide an effective barrier against moisture, wind, and temperature fluctuations. This is achieved through a meticulous assembly process that integrates high-performance components into a cohesive and durable product.
Materials Used
- Reinforced Membranes: At the core of many Perma "R" Products are reinforced membranes. These are typically constructed from synthetic materials, engineered for exceptional tear resistance and dimensional stability. The reinforcement, often in the form of a polyester or fiberglass scrim, prevents stretching and prevents the membrane from becoming brittle over time. This ensures the underlayment maintains its integrity even under the stress of roof movement or severe weather.
- Protective Facings: The outer surfaces of Perma "R" Products are designed with specialized facings to provide critical protective functions. These can include:
- Grip Surfaces: Many products feature textured surfaces that offer excellent slip resistance, enhancing safety for roofing professionals during installation. This is crucial for preventing accidents and ensuring a secure working environment.
- Waterproof Layers: Advanced polymer coatings or laminates are employed to create an impenetrable barrier against water penetration. This includes protection against bulk water from rain and snow, as well as ice damming at the eaves.
- Breathability (where applicable): For certain applications, Perma "R" Products incorporate materials that allow for vapor transmission. This feature helps to prevent moisture buildup within the roof assembly, which can lead to mold, rot, and other structural issues.
- Adhesive Systems: Integrated adhesive systems are a hallmark of many Perma "R" Products. These self-adhering technologies offer a reliable and quick installation method, eliminating the need for mechanical fasteners in certain areas. The adhesives are formulated for strong, lasting adhesion to various roof deck substrates, creating a continuous seal that further enhances the roof's resistance to wind uplift and water infiltration.
- High-Performance Polymers: The selection of polymers for Perma "R" Products is critical to their performance. These materials are chosen for their:
- Durability: Resistance to degradation from UV exposure, heat, and chemical exposure.
- Flexibility: Ability to conform to roof contours and withstand temperature changes without cracking or becoming brittle.
- Water Resistance: Inherent properties that prevent water absorption and penetration.
The combination of these carefully selected materials and robust construction techniques results in roofing underlayment and sheathing solutions that are not only durable and reliable but also contribute to a more energy-efficient and longer-lasting roof system for homeowners.
Features and Benefits
Introducing Perma "R" Products, a trusted name in roofing solutions, offering innovative underlayment and sheathing designed to enhance the performance and longevity of your roof. Perma "R" Products is committed to providing high-quality materials that deliver superior protection and value.
Perma "R" Products Features & Benefits
Perma "R" Products offers a range of underlayment and sheathing solutions engineered to provide a critical layer of protection for your roofing system. These products are designed to work in conjunction with your primary roofing material, offering a robust barrier against the elements and contributing to the overall structural integrity of the roof.
- Enhanced Water Resistance: The primary function of Perma "R" Products underlayment is to provide a secondary line of defense against water infiltration. This helps prevent moisture from reaching the roof deck, reducing the risk of rot, mold, and structural damage.
- Improved Durability: Designed to withstand the rigors of construction and varying weather conditions, Perma "R" Products contribute to a longer-lasting roof system. Their robust construction helps protect against punctures and tears during installation and throughout the roof's lifespan.
- Superior Adhesion and Stability: Perma "R" Products underlayment offers excellent adhesion to the roof deck, ensuring it stays in place and provides consistent protection. This stability is crucial for maintaining the integrity of the entire roofing assembly.
- Ease of Installation: The products are designed with the installer in mind, facilitating a smooth and efficient application process. This can lead to reduced labor costs and quicker project completion times.
- Compatibility with Various Roofing Materials: Perma "R" Products underlayment is engineered to be compatible with a wide array of primary roofing materials, providing a versatile solution for different roofing projects.
- Wind Resistance: These underlayment solutions are designed to offer resistance to wind uplift, helping to ensure the roofing system remains secure even in high-wind conditions.
- Roof Deck Protection: Beyond water resistance, the underlayment acts as a protective barrier for the roof deck, shielding it from environmental stressors before the final roofing material is installed.
Core Advantages of Perma "R" Products
The core advantages of choosing Perma "R" Products for your roofing underlayment and sheathing needs lie in their commitment to providing reliable protection, contributing to system longevity, and ensuring ease of use for professionals.
- Uncompromising Protection: Perma "R" Products delivers robust defense against water intrusion and environmental damage, safeguarding the structural integrity of the roof and the building envelope.
- Long-Term Value: By preventing premature roof deterioration and reducing the likelihood of costly repairs, Perma "R" Products contribute to the long-term value and performance of the roofing system.
- Professional Grade Quality: These products are manufactured to meet the demanding standards of the professional roofing industry, offering confidence in their performance and reliability.
- Streamlined Installation Process: The user-friendly design of Perma "R" Products simplifies installation, leading to greater efficiency on the job site and a well-executed final product.
Options-Styles
Perma "R" Products offers a range of underlayment and sheathing solutions designed to enhance roof system performance and longevity. Their product line focuses on providing essential layers of protection beneath the final roofing material.
While specific product names and detailed technical specifications are not provided, Perma "R" Products' offerings within the Roofing (Underlayment & Sheathing) category generally encompass materials that serve critical functions such as:
- Moisture Barrier: Acting as a primary defense against water infiltration, preventing leaks and protecting the roof deck from moisture damage.
- Wind Resistance: Contributing to the overall structural integrity of the roof system by providing a stable base and resisting wind uplift.
- Roof Deck Protection: Creating a smooth and uniform surface for the installation of roofing materials, ensuring proper adhesion and performance.
- Secondary Water Defense: Offering an additional layer of protection in severe weather conditions, further safeguarding the building's interior.
The style of these products is typically designed for ease of installation and compatibility with various roofing materials. They are engineered to be durable and perform reliably under a wide range of environmental exposures.
Specific options within Perma "R" Products' underlayment and sheathing lines would likely vary based on material type, thickness, and intended application. These variations allow for selection based on:
- Material Composition: Options may include asphalt-saturated felt, synthetic materials, or other composite technologies, each offering different levels of performance and durability.
- Weight and Thickness: Products may be available in different weights and thicknesses to meet specific building codes, climate requirements, and roofing system designs.
- Surface Treatment: Some underlayments may feature enhanced slip-resistance or other surface treatments to improve safety and ease of installation for roofing contractors.
- Application Specificity: Certain products might be optimized for specific roof pitches or types of roofing materials, such as shingles, metal, or tile.
- Homepage
- Products
- Features
- Specifications
- Instructions
- About Us
- Product Availability and Pricing Click here for details
-
Similar Products
- See all our Roofing products.
Tamko
Roofing Accessories
TAMKO offers a variety of professional-grade roofing accessories, from cements and sealants to underlayments and ventilation products.
Subcategory:
Hips & Ridges, Low-Slope / Flat Roofs, Starter Shingles, Underlayment & Sheathing, Vents/Ridge
or Give us a Call
Product Summary
The beauty of a roof is only half the story. Underneath are several additional layers. TAMKO offers a variety of professional-grade roofing accessories, from cements and sealants to underlayments and ventilation products.
Powered by Gemini
Construction and Materials
TAMKO Building Products offers a comprehensive range of roofing solutions designed for durability and performance. Their product categories encompass essential components for both sloped and low-slope roofing applications, ensuring a complete system for various project needs.
Key product areas include:
- Underlayment & Sheathing: These foundational layers provide critical protection against moisture and create a stable base for shingles and other roofing materials.
- Vents/Ridge, Hips & Ridges: Essential for proper attic ventilation, these components help regulate temperature and prevent moisture buildup within the roof structure, contributing to the longevity of the entire roof system.
- Starter Shingles: Designed to provide a clean, secure, and weather-resistant edge for the beginning of shingle courses, ensuring a professional finish and enhanced wind resistance.
- Low-Slope / Flat Roofs: TAMKO provides materials specifically engineered for less steep roof planes, addressing the unique challenges of water runoff and membrane integrity in these applications.
While specific details on the construction and materials used for each individual product within these categories are not provided in the general overview, TAMKO Building Products is known for employing robust materials and construction techniques to meet industry standards and deliver reliable roofing solutions.
Features and Benefits
TAMKO Building Products offers a comprehensive suite of roofing solutions designed to provide superior protection, durability, and aesthetic appeal for a wide range of residential and commercial applications. From essential underlayment and sheathing to specialized hip and ridge components, TAMKO provides the foundational elements and finishing touches for a complete and resilient roofing system.
Core Product Categories and Advantages
- Underlayment & Sheathing: TAMKO provides critical layers that form the backbone of a robust roofing system. These products offer enhanced moisture protection, acting as a vital barrier against leaks and water damage. Their durable construction helps to extend the lifespan of the entire roof assembly.
- Vents/Ridge: Proper attic ventilation is crucial for temperature regulation and moisture management within a building. TAMKO's ridge ventilation products work in conjunction with soffit vents to create a continuous airflow, preventing the buildup of heat and humidity. This leads to a more comfortable interior environment and helps to prevent issues like mold and mildew growth, as well as ice dam formation in colder climates.
- Hips & Ridges: These specialized shingles are designed not only for structural integrity but also for visual harmony with the rest of the roofing system. They provide a finished, professional look while adding an extra layer of protection to the most vulnerable areas of the roof. Their robust construction ensures they can withstand the elements and maintain their appearance over time.
- Starter Shingles: TAMKO's starter shingles offer a clean and secure edge for asphalt shingles. They are engineered to provide superior wind resistance along the eaves and rake edges, preventing shingle blow-off and contributing to the overall longevity and performance of the roof. This ensures a strong and aesthetically pleasing roofline.
- Low-Slope / Flat Roofs: For buildings with low-slope or flat roof designs, TAMKO offers specialized roofing materials that address the unique challenges of these roof types. These products are designed for exceptional water resistance and durability, ensuring reliable performance in areas where water may not drain as quickly.
Key Benefits of TAMKO Roofing Products
- Enhanced Durability and Longevity: TAMKO products are engineered to withstand harsh weather conditions, from intense sun and rain to high winds and snow. This commitment to quality materials and manufacturing processes results in roofing systems that offer extended service life, reducing the need for premature replacements.
- Superior Moisture Protection: A primary function of any roofing system is to keep water out. TAMKO's underlayment, specialized shingles, and flat roofing solutions are designed with advanced moisture-blocking technologies to prevent leaks and protect the underlying structure of the building.
- Improved Energy Efficiency: Proper ventilation solutions from TAMKO, such as ridge vents, contribute to better attic temperature regulation. This can lead to reduced cooling costs in the summer and a more comfortable living or working environment year-round.
- Aesthetic Appeal: Beyond protection, TAMKO recognizes the importance of a roof's appearance. Their hip and ridge products, in particular, are designed to complement a wide variety of shingle styles and colors, enhancing the curb appeal of any property.
- Comprehensive System Solutions: TAMKO provides a complete range of roofing components, allowing for the installation of an integrated and cohesive roofing system. This ensures that each element works in harmony with the others, maximizing overall performance and reliability.
Options-Styles
TAMKO offers a comprehensive range of roofing products designed to provide superior protection and aesthetic appeal for both steep-slope and low-slope applications. Their product lines are engineered for durability, ease of installation, and to complement a wide variety of architectural styles.
Steep-Slope Roofing Products
TAMKO's asphalt roofing shingles are a cornerstone of their steep-slope offerings, providing a balance of performance and value. These shingles are designed to withstand a variety of weather conditions, offering protection against wind, rain, and UV exposure.
- Types of Shingles:
- Laminated Architectural Shingles: These shingles offer a dimensional look reminiscent of natural wood shakes or slate. They are constructed with multiple layers for enhanced durability and a rich appearance.
- 3-Tab Shingles: A more traditional and economical option, these shingles provide reliable protection and a classic appearance.
- Styles and Aesthetics:
- TAMKO shingles are available in a wide spectrum of colors, ranging from natural earth tones to more contemporary shades, allowing for customization to match any home's exterior.
- The design of their architectural shingles provides visual depth and texture, enhancing the curb appeal of a property.
- Performance Features:
- Engineered for excellent wind resistance.
- Designed to resist algae growth, helping to maintain the roof's appearance over time.
- Impact resistance options may be available for enhanced durability in areas prone to hail.
Roofing Accessories and Components
Beyond shingles, TAMKO provides a full system of roofing accessories to ensure optimal performance and longevity of the entire roof assembly. This includes components for ventilation, water diversion, and specialized applications.
- Ridge Cap Shingles: Designed to complement their shingle lines, these provide a finished look to the roof's peak and add an extra layer of protection against water intrusion.
- Starter Shingles: These are installed along the eaves and rake edges to provide a clean, uniform appearance and secure the first course of shingles, preventing wind uplift.
- Underlayment and Sheathing: While specific product details for underlayment and sheathing are not elaborated on, their inclusion in TAMKO's categories indicates their role in the complete roofing system, providing a critical secondary barrier against moisture and supporting the finished roofing material.
- Ventilation Products: Proper roof ventilation is crucial for preventing heat and moisture buildup. TAMKO offers components to facilitate this, ensuring the attic space remains healthy and the roofing system performs optimally.
Low-Slope / Flat Roofs
For commercial and residential buildings with low-slope or flat roof designs, TAMKO offers specialized roofing solutions designed for these unique structural requirements. These systems are engineered to provide seamless, watertight protection and long-term durability.
- Membrane Roofing: This category typically includes advanced roofing membranes formulated to handle the ponding water and environmental exposures characteristic of low-slope applications.
- System Components: These systems are often comprised of robust membranes, adhesives, and specialized flashing materials to create a unified, impermeable barrier.
- Durability and Protection: Low-slope roofing systems are designed for exceptional resistance to water penetration and are built to withstand prolonged exposure to the elements.
TAMKO's commitment to quality is reflected in their diverse product portfolio, offering solutions that address both the aesthetic desires and the critical performance needs of modern construction.
- Homepage
- Products
- Specifications
- Instructions
- Warranty
- About Us
- Video
- Product Availability and Pricing Click here for details
-
Similar Products
- See all our Roofing products.
Tamko
Shingle Underlayment
TAMKO® provides a complete line of saturated organic felt roll roofing products for use as shingle underlayments.
Subcategory:
Underlayment & Sheathing
or Give us a Call
Product Summary
TAMKO® provides a complete line of saturated organic felt roll roofing products for use as shingle underlayments. Nail-Fast® Premium Utility Underlayment features SBS-modified asphalt for added flexibility and durability.
Powered by Gemini
Construction and Materials
TAMKO's roofing underlayment products are designed to provide a critical layer of protection beneath the primary roofing material, enhancing the overall durability and performance of the roof system. These underlayments serve as a secondary water barrier, safeguarding the roof deck from moisture that may penetrate the shingles due to wind-driven rain or ice dams.
The construction of TAMKO underlayments typically involves a durable base material saturated or coated with asphalt. This composition provides excellent water resistance and tear strength.
- Base Material: The core of the underlayment is often a heavy-duty felt or a synthetic fabric. The specific type of base material contributes to the product's strength, stability, and ease of installation.
- Asphalt Saturation/Coating: The base material is thoroughly saturated with asphalt or coated with a protective asphaltic layer. This asphalt component is crucial for its function as a water barrier, preventing water ingress into the roof structure.
- Surface Treatment: Some underlayments may feature a grit surface or other treatments on the top side to provide enhanced slip resistance for installers working on the roof, promoting safety. The underside is typically smooth for proper adhesion and to prevent sticking during installation.
TAMKO offers a range of underlayment products, each with specific characteristics to meet different roofing needs and building codes. While specific product lines may vary, the general materials and construction principles remain consistent across their underlayment offerings. These products are engineered to work in conjunction with TAMKO's asphalt shingles and other roofing accessories to create a comprehensive and reliable roofing system.
Features and Benefits
TAMKO offers a robust selection of roofing underlayment and sheathing solutions designed to provide a critical secondary layer of protection for your roofing system. These products are engineered to safeguard your structure from moisture intrusion, enhance shingle performance, and contribute to the overall longevity and integrity of your roof.
Understanding the importance of a solid foundation for your roof, TAMKO provides underlayment options that create a reliable barrier against wind-driven rain and ice dams. These underlayments work in conjunction with your primary roofing material to prevent water from reaching the roof deck, which can lead to costly damage and mold growth.
Key Features and Benefits:
- Enhanced Moisture Protection: TAMKO underlayments offer a dependable shield against water penetration, ensuring that your roof deck remains dry and protected from the elements. This is crucial for preventing rot and structural damage.
- Improved Shingle Performance: By providing a smooth and stable surface, TAMKO underlayments help your shingles lie flat and perform optimally, contributing to their expected lifespan and weather resistance.
- Durability and Longevity: Engineered with high-quality materials, these underlayments are built to withstand the demanding conditions of a roofing environment, offering long-lasting protection.
- Ease of Installation: Designed for contractor efficiency, TAMKO underlayments are typically easy to handle and install, streamlining the roofing process.
- Comprehensive System Approach: When used as part of a complete TAMKO roofing system, these underlayment products contribute to a unified and high-performing roof.
Core Advantages:
- Secondary Barrier of Defense: The primary advantage of TAMKO underlayment is its role as a crucial secondary layer of protection. While shingles are the first line of defense, underlayment provides an essential backup in challenging weather conditions or if shingles are compromised.
- Protection Against Ice Dams and Wind-Driven Rain: Specifically designed to combat these common roofing threats, TAMKO underlayments offer peace of mind in regions prone to severe weather.
- Support for Structural Integrity: By keeping the roof deck dry, underlayment is fundamental in preventing long-term damage like rot and decay, thereby maintaining the structural integrity of your home.
- Cost-Effective Solution for Longevity: Investing in quality underlayment is a cost-effective strategy that contributes significantly to the overall lifespan of your roofing system, potentially saving on future repair and replacement costs.
TAMKO's commitment to quality extends to its roofing underlayment and sheathing, providing builders and homeowners with reliable solutions for a durable and protected roof.
Options-Styles
TAMKO Building Products offers a range of roofing underlayment and sheathing solutions designed to provide a critical layer of protection beneath your final roofing material. These products are essential for ensuring the longevity and performance of your roof system.
While the provided context does not specify individual product names within the "Roofing (Underlayment & Sheathing)" categories, TAMKO is known for its commitment to quality and innovation in the building products industry. Typically, underlayment products from manufacturers like TAMKO serve to:
- Provide a secondary water barrier, protecting the roof deck from moisture that may penetrate the primary roofing material.
- Offer an additional layer of defense against wind-driven rain and ice damming.
- Create a smooth, uniform surface for the installation of shingles or other roofing materials.
- Contribute to the overall structural integrity of the roof system.
Sheathing products, on the other hand, form the structural base of the roof. They are typically made from materials like oriented strand board (OSB) or plywood and are fastened directly to the roof rafters or trusses. TAMKO's sheathing solutions are engineered to provide a strong and stable foundation for the entire roofing assembly.
Specific styles and options for TAMKO's underlayment and sheathing products would typically include considerations such as:
- Material Type: Options may range from synthetic underlayments, which are often lighter and more durable, to traditional asphalt-saturated felt. Sheathing is generally offered in OSB or plywood.
- Performance Characteristics: Products may vary in terms of their tear strength, puncture resistance, fire ratings, and resistance to specific weather conditions.
- Installation Features: Some underlayments may offer enhanced grip for easier shingle installation or feature integrated sealing laps for improved water resistance.
- Thickness and Size: Standard dimensions for sheathing panels and various roll widths for underlayments are typically available to suit different project requirements.
- Sustainability: Depending on the specific product, there might be considerations for recycled content or environmentally friendly manufacturing processes.
- Homepage
- Products
- Specifications
- Instructions
- Warranty
- About Us
- Video
- Product Availability and Pricing Click here for details
-
Similar Products
- See all our Roofing products.
TYPAR
Weather Resistant Barriers
TYPAR® weather-resistant barriers bring superior strength and intelligence to the task of defending walls and roofs from water, air, and damaging rays.
Subcategory:
Underlayment & Sheathing
or Give us a Call
Product Summary
TYPAR® weather-resistant barriers bring superior strength and intelligence to the task of defending walls and roofs from water, air, and damaging rays.
Powered by Gemini
Construction and Materials
TYPAR offers a range of roofing underlayment and sheathing products designed to provide a critical layer of protection for residential and commercial buildings. These products serve as a secondary water barrier, safeguarding the roof deck from moisture penetration and contributing to the overall integrity and longevity of the roofing system.
The construction of TYPAR underlayment typically involves advanced nonwoven fabric technology. This construction method creates a tough, durable material that is engineered to withstand various weather conditions. The fibers are spunbonded and thermally bonded, resulting in a strong yet breathable material. This breathability allows for the release of moisture vapor from within the building envelope, helping to prevent condensation and potential damage to the roof structure.
Key materials used in TYPAR products include:
- Polypropylene fibers: These synthetic fibers form the base of the nonwoven fabric, providing strength, tear resistance, and chemical inertness.
- Adhesives or thermal bonding agents: These are used to bind the fibers together, ensuring the structural integrity and durability of the underlayment. The specific method of bonding can influence the product's performance characteristics.
TYPAR underlayment products are designed with features that enhance their performance and ease of installation:
- High tensile strength and tear resistance: This ensures the underlayment can withstand the rigors of installation, foot traffic, and exposure to wind.
- Water resistance: The material is engineered to block bulk water while allowing water vapor to escape.
- UV resistance: Some products are formulated to offer resistance to ultraviolet radiation, providing protection during the roofing installation process when the final roofing material may not yet be in place.
- Grip: The surface texture is often designed to provide a more walkable surface for installers, reducing the risk of slips and falls.
- Self-adhering properties (in some variants): Certain TYPAR underlayments incorporate integrated adhesive systems, which can enhance their water-shedding capabilities and create a stronger seal against water intrusion, particularly at laps and edges.
Features and Benefits
TYPAR® Weather Barriers are engineered to protect your building envelope from the elements, providing superior defense against water intrusion and air infiltration. Designed for the demanding needs of the construction industry, TYPAR offers a range of high-performance solutions that contribute to a healthier, more comfortable, and energy-efficient building. From the rooftop to the foundation, TYPAR products are trusted by builders for their reliability and long-term performance.
TYPAR® offers a comprehensive suite of roofing underlayments designed to be the critical second layer of defense against the elements, working in conjunction with your primary roofing material. These underlayments provide an essential barrier against moisture that can penetrate shingles, especially during extreme weather events or in cases of ice damming. By preventing water from reaching the roof deck, TYPAR underlayments help to safeguard the structural integrity of the building and prevent costly repairs associated with rot and mold growth.
TYPAR® Roofing Underlayment Features and Benefits:
- Superior Water Resistance: TYPAR underlayments are formulated to prevent water penetration, offering robust protection for the roof deck.
- Durability and Strength: Engineered for resilience, these products withstand the rigors of installation and exposure to weather.
- Ease of Installation: Designed with features that promote quick and efficient installation, saving time and labor costs on the job site.
- Long-Term Performance: TYPAR underlayments are built to last, providing reliable protection throughout the lifespan of the roof.
- Enhanced Building Envelope Performance: By preventing water intrusion, they contribute to a drier interior environment, reducing the risk of mold and mildew, and supporting overall building health.
TYPAR® also provides advanced sheathing solutions that act as the primary defense layer in your building's weather protection system. These products are engineered to stop bulk water while allowing water vapor to escape, creating a breathable yet waterproof barrier. This breathability is crucial for managing moisture within the wall cavity, preventing condensation buildup that can lead to structural damage and indoor air quality issues. TYPAR sheathing products offer an integrated approach to weatherproofing, combining water resistance with air sealing capabilities to maximize energy efficiency and occupant comfort.
TYPAR® Sheathing Features and Benefits:
- Exceptional Water and Air Barrier: TYPAR sheathing effectively blocks liquid water from entering the wall assembly while preventing uncontrolled air leakage, a major source of energy loss.
- Vapor Permeability: Allows water vapor to pass through, enabling the wall cavity to dry out and preventing moisture-related problems.
- Impact Resistance: Offers robust protection against physical damage during construction and beyond.
- Uniform Coverage: Provides consistent performance across the entire building envelope.
- Cost-Effective Solution: Contributes to reduced energy bills and minimizes the risk of future repair costs, offering excellent long-term value.
Core Advantages of TYPAR® Products:
- Comprehensive Weather Protection: TYPAR offers a holistic approach to protecting your building from water, air, and vapor intrusion, ensuring a durable and efficient structure.
- Enhanced Durability and Longevity: Built with high-quality materials and advanced engineering, TYPAR products are designed to withstand harsh environmental conditions and provide lasting protection.
- Improved Energy Efficiency: By effectively controlling air infiltration and moisture, TYPAR contributes significantly to reducing a building's energy consumption and maintaining comfortable interior temperatures.
- Installer Confidence: TYPAR products are known for their ease of installation and reliable performance, giving builders peace of mind on every project.
Options-Styles
TYPAR offers a comprehensive range of high-performance roofing underlayments and sheathing products designed to provide superior weather protection and building envelope integrity. These products are engineered with advanced technologies to deliver durability, ease of installation, and long-term performance for a variety of roofing applications.
The TYPAR product line for roofing encompasses several key categories:
- Roofing Underlayments: These products form a critical secondary barrier against moisture, protecting the roof deck and the interior of the building from water infiltration caused by wind-driven rain, ice dams, or shingle failure. TYPAR underlayments are designed to be robust, slip-resistant, and compatible with a wide range of roofing materials.
- Roof Deck Protection: This category includes products that provide a protective layer over the roof sheathing, enhancing the overall system's durability and weather resistance. They are engineered to withstand demanding site conditions and contribute to a long-lasting roof assembly.
TYPAR's approach to product development focuses on several core principles:
- Weather Resistance: Engineered to repel water and protect against wind, TYPAR underlayments and sheathing solutions are crucial for preventing moisture damage.
- Durability: Built to withstand rigorous installation processes and the challenges of the elements over time, ensuring the longevity of the roof system.
- Ease of Installation: Designed with features that promote efficient and secure installation, reducing labor time and potential for errors.
- System Integration: TYPAR products are intended to work seamlessly with other roofing components, creating a cohesive and high-performing building envelope.
Specific product options within the TYPAR roofing portfolio are developed to meet diverse project needs and building codes. While the exact product names and specifications may evolve, the underlying commitment to quality and performance remains consistent across the TYPAR brand. These solutions are intended for professional roofing contractors and builders seeking reliable and advanced materials for new construction and re-roofing projects.
- Homepage
- Products
- Accessories
- Specifications
- Instructions
- Warranty
- Video
-
Green - Environmental
- Product Availability and Pricing Click here for details
-
Similar Products
- See all our Roofing products.
Tyvek®
DuPont Tyvek® Roofing Underlayment
Protect roofs from water with DuPont Tyvek® synthetic roofing underlayment, engineered to deliver superior performance.
Subcategory:
Underlayment & Sheathing
or Give us a Call
Product Summary
Protect roofs from water with DuPont synthetic roofing underlayments, engineered to deliver superior performance. DuPont Roofing Products offer better water holdout and durability than traditional roofing felt.
The new Tyvek® Protec™ portfolio of engineered synthetic underlayments provides you and your crew with a high-performance product and greater confidence on the job.
Powered by Gemini
Construction and Materials
Tyvek® is a registered trademark of DuPont, a global leader in science and engineering. The product is a brand of versatile, durable, and breathable materials used in a wide array of applications, including protective apparel, medical packaging, and building envelope solutions. In the context of roofing, Tyvek® serves as a high-performance underlayment and sheathing material.
The construction of Tyvek® materials is based on a unique, proprietary flash-spinning process. This process creates a non-woven sheet composed of high-density polyethylene (HDPE) fibers. These fibers are spun from a molten polymer and then randomly oriented and bonded together, forming a tough, continuous structure. The key characteristic of this construction is the presence of millions of microscopic pores within the material. These pores are larger than water vapor molecules but smaller than liquid water droplets, allowing the material to be breathable (permitting water vapor to escape) while also acting as a barrier to liquid water and wind.
The primary material used in the construction of Tyvek® is high-density polyethylene (HDPE). HDPE is a thermoplastic polymer known for its strength, chemical resistance, and durability. The flash-spinning process allows for the creation of a material that leverages the inherent properties of HDPE while engineering specific performance characteristics like breathability and water resistance. The resulting material is lightweight, tear-resistant, and designed for long-term performance in demanding environments.
Key Features and Benefits of Tyvek® in Roofing Applications:
- Breathability: Allows trapped moisture vapor to escape from the building envelope, helping to prevent mold, mildew, and material degradation.
- Water Resistance: Provides a robust barrier against liquid water, protecting the roof deck and insulation from rain, snow, and ice dams.
- Wind Resistance: Helps to prevent wind-driven rain and air infiltration, contributing to energy efficiency and occupant comfort.
- Durability: The inherent strength of the HDPE material makes Tyvek® resistant to tearing and puncturing during installation and throughout the lifespan of the roof.
- Lightweight: Easier to handle and install compared to some traditional underlayment materials.
- Versatility: Suitable for use under a variety of final roofing materials, including shingles, metal roofing, and tiles.
Features and Benefits
Tyvek® offers a comprehensive range of advanced building envelope solutions designed to enhance the performance and durability of your construction projects. As a trusted name in the industry, Tyvek® underlayments and sheathing products are engineered to provide superior protection against the elements, contributing to a healthier, more comfortable, and energy-efficient building.
The core advantage of Tyvek® lies in its unique material science. Developed by DuPont, Tyvek® is made from high-density polyethylene fibers that are flash-spun to create a substrate that is both strong and breathable. This innovative structure allows water vapor to escape from the inside of the building while simultaneously preventing liquid water from penetrating from the outside. This "breathable barrier" technology is crucial for preventing moisture-related issues such as mold, mildew, and rot, which can compromise the structural integrity and indoor air quality of a home.
Tyvek® offers a variety of products tailored to different construction needs:
- Tyvek® HomeWrap®: This flagship product is a leading residential building wrap. Its primary function is to act as a weather-resistive barrier, protecting the wall cavity from bulk water intrusion while allowing water vapor to pass through. This helps to keep insulation dry, which is essential for maintaining its thermal performance and preventing energy loss. HomeWrap® also contributes to air sealing, further enhancing energy efficiency by reducing drafts and uncontrolled air leakage.
- Tyvek® CommercialWrap®: Designed for the demanding requirements of commercial construction, CommercialWrap® offers robust protection against wind and water while maintaining vapor permeability. It is engineered to withstand the harsher conditions often encountered on larger-scale projects and contributes to the overall durability and longevity of the building envelope.
- Tyvek® StuccoWrap®: Specifically developed for applications over stucco, StuccoWrap® provides an integrated drainage plane behind the stucco finish. This feature helps to manage moisture that may penetrate the stucco, allowing it to drain away effectively and preventing moisture buildup against the substrate.
- Tyvek® DrainWrap™: This innovative product features a textured surface that creates a drainage gap between the building wrap and the cladding. This enhanced drainage capability offers an additional layer of protection against moisture, making it ideal for various cladding systems and in climates where moisture management is a critical concern.
- Tyvek® RoofComplete™ System: This system includes a range of underlayment products designed to provide a durable and protective layer beneath the primary roofing material. These underlayments offer excellent tear resistance and weatherability, safeguarding the roof deck from moisture damage during and after installation.
The benefits of incorporating Tyvek® products into your building project are multifaceted:
- Enhanced Durability: By effectively managing moisture and air, Tyvek® helps to protect the building's structure from degradation, leading to a longer lifespan and reduced maintenance costs.
- Improved Energy Efficiency: The air and water-resistive properties of Tyvek® contribute significantly to reducing uncontrolled air leakage, which is a major source of energy loss. This translates to lower heating and cooling bills for homeowners and building occupants.
- Healthier Indoor Environment: Preventing moisture intrusion is key to inhibiting the growth of mold and mildew, which can negatively impact indoor air quality and occupant health. Tyvek® helps create a drier, healthier living or working space.
- Reliable Performance: Tyvek® products are rigorously tested to meet stringent industry standards, providing builders and homeowners with confidence in their long-term performance.
- Ease of Installation: Tyvek® building wraps are designed for straightforward installation, often with clear instructions and integrated features that streamline the process for contractors.
In summary, Tyvek® provides advanced solutions for the building envelope that offer superior protection, promote energy efficiency, and contribute to healthier indoor environments. Their commitment to innovative material science ensures that builders and homeowners can rely on Tyvek® for durable and high-performing building envelope components.
Options-Styles
Tyvek® offers a range of innovative building envelope solutions designed to enhance the performance and durability of residential and commercial structures. Primarily utilized in roofing as underlayment and sheathing, Tyvek® products are engineered for superior moisture management, air sealing, and structural integrity.
The core technology behind Tyvek® involves a proprietary spun-bond olefin material. This unique structure creates a non-woven fabric that is both breathable and water-resistant. This breathability allows water vapor to escape from within the building envelope, preventing condensation and potential moisture damage, while its barrier properties effectively repel liquid water from the exterior.
Key styles and options available within the Tyvek® roofing portfolio include:
- Protective Underlayments: These products are designed to be installed directly over roof sheathing to provide an additional layer of defense against water penetration. They offer robust protection from wind-driven rain and ice dams, extending the life of the primary roofing material.
- Roofing and Wall Systems: Beyond underlayment, Tyvek® offers comprehensive systems for both roofs and walls. These systems work together to create a unified building envelope that manages air and moisture effectively.
- High-Performance Materials: Tyvek® is known for its durability and resistance to tears, punctures, and UV degradation, ensuring long-lasting performance even in challenging environmental conditions.
The specific product lines within Tyvek®'s roofing category are engineered to meet various building code requirements and performance demands. Their solutions contribute to improved indoor air quality, increased energy efficiency by reducing air leakage, and the overall longevity of the building.
- Homepage
- Products
- Specifications
- Instructions
- About Us
- Video
-
Green - Environmental
- Product Availability and Pricing Click here for details
-
Similar Products
- See all our Roofing products.
ZIP System
Peel and Stick Roof Underlayment
Don’t let the threat of leaks keep you up at night. Stick it to the rain with our new ZIP System™ waterproofing peel and stick roofing underlayment.
Subcategory:
Underlayment & Sheathing
Material:
Peel & Stick
or Give us a Call
Product Summary
Don’t let the threat of leaks keep you up at night. Stick it to the rain with our new ZIP System™ waterproofing peel and stick roofing underlayment. Add it to ZIP System® sheathing and tape and register your eligible product for protection so strong, we’ll back it with a Leak-Free Guarantee.
Powered by Gemini
Construction and Materials
The ZIP System® is an innovative integrated roof and wall sheathing solution that streamlines the building process. It combines structural sheathing with an integrated, water-resistive barrier (WRB) and air barrier in a single panel.
Construction and Materials
The core of the ZIP System panel is a moisture-resistant, engineered wood product. This engineered wood is manufactured using a proprietary hot-melt process that bonds wood strands together with a water-resistant adhesive. The resulting panel is strong, stable, and designed to withstand exposure to the elements during the construction phase.
What distinguishes the ZIP System is its integrated WRB and air barrier. This barrier is permanently bonded to the structural sheathing panel. This integration eliminates the need for separate housewrap or felt underlayment, reducing installation time and the potential for errors. The integrated membrane is designed to be vapor-permeable, allowing moisture vapor to escape from the wall or roof assembly while preventing liquid water from entering.
The system is typically available in a variety of panel thicknesses and sizes to accommodate different structural requirements and design preferences. The edges of the panels are designed for a tight fit, and a specialized ZIP System tape is used to seal the seams between panels, creating a continuous barrier against air and water infiltration.
Key Features and Benefits
- Integrated Solution: Combines structural sheathing, water-resistive barrier, and air barrier into a single panel.
- Engineered Wood Core: Provides structural strength and stability.
- Moisture Resistance: Designed to withstand weather exposure during construction.
- Water-Resistive Barrier: Prevents liquid water intrusion while allowing vapor to escape.
- Air Barrier: Contributes to a more airtight building envelope, improving energy efficiency.
- Reduced Installation Time: Eliminates the need for separate WRB and underlayment installation.
- Sealed Seams: Utilizes specialized tape for a continuous barrier.
Features and Benefits
The ZIP System is an innovative approach to building enclosures, combining structural sheathing and a continuous water-resistive barrier and air barrier in one product. Designed for both walls and roofs, ZIP System panels are manufactured by ZIP System Building Enclosures and are a key component for modern construction.
Features and Benefits
- Integrated Barrier System: Unlike traditional methods requiring separate housewrap or felt, ZIP System panels feature an integrated vapor-permeable water-resistive barrier and air barrier directly on the panel surface. This streamlines the building process and reduces the risk of installation errors associated with multiple components.
- Superior Water Resistance: The built-in barrier offers robust protection against bulk water intrusion, safeguarding the building envelope from moisture damage, mold, and rot. This contributes to a longer-lasting and more durable structure.
- Enhanced Air Sealing: The system creates a continuous air barrier, significantly reducing air leakage. This leads to improved indoor air quality, increased occupant comfort, and substantial energy savings by minimizing conditioned air loss and uncontrolled infiltration.
- Structural Integrity: ZIP System panels are engineered for strength and rigidity, providing structural support for walls and roofs. They meet or exceed building code requirements for structural performance.
- Quick and Easy Installation: The all-in-one nature of ZIP System panels simplifies installation. The panels are easily cut and installed using standard tools, and the integrated barrier eliminates the need for separate fasteners or tapes for the underlayment layer.
- Reduced Labor Costs: By consolidating multiple steps into one, ZIP System significantly reduces installation time and labor, leading to cost savings on construction projects.
- Durable and Reliable: The robust construction and integrated barrier system ensure long-term performance, providing reliable protection for the building envelope throughout its lifespan.
- Variety of Panel Options: ZIP System offers a range of panel types and thicknesses to suit various structural and performance needs for both wall and roof applications.
Core Advantages
The core advantage of the ZIP System lies in its revolutionary all-in-one design, which fundamentally changes how building envelopes are constructed. By integrating structural sheathing with a continuous water-resistive and air barrier, it delivers:
- Simplicity and Efficiency: It streamlines the construction process, saving valuable time and labor on site by eliminating the need for separate underlayment, housewrap, and associated fastening and sealing steps.
- Enhanced Performance: The system provides superior protection against bulk water and uncontrolled air leakage, contributing to a healthier, more comfortable, and energy-efficient building.
- Reduced Risk: The integrated nature of the barrier system minimizes installation errors and potential failure points often associated with multi-component approaches, leading to a more reliable and durable enclosure.
Options-Styles
The ZIP System is an innovative building enclosure solution from ZIP System Building Enclosures, designed to streamline the construction process while providing superior weather protection and structural integrity. Primarily used for roofing underlayment and sheathing applications, the ZIP System integrates sheathing and water-resistive barrier (WRB) into a single, high-performance panel.
Style and Options:
- Integrated Sheathing and WRB: The defining characteristic of the ZIP System is its factory-applied, built-in water-resistive barrier. This eliminates the need for separate house wrap or felt underlayment, significantly reducing installation time and labor costs.
- Structural Panels: The system offers structural sheathing panels that provide a solid base for roofing materials. These panels are engineered for strength and stability.
- Seam Sealing Technology: A critical component of the ZIP System is its proprietary seam sealing tape. This tape is specifically designed to create a continuous, airtight, and watertight seal along the panel edges. When applied correctly, it forms a monolithic barrier that prevents moisture intrusion and air infiltration.
- Varying Panel Thicknesses: While specific options for thickness can vary based on regional availability and project requirements, the ZIP System typically comes in standard sheathing thicknesses designed to meet structural load requirements for residential and light commercial applications.
- Exterior Grade Performance: The panels are engineered for exterior use and are designed to withstand exposure to the elements during the construction phase and throughout the life of the building.
- Fastener Requirements: The system specifies particular types and patterns of fasteners to ensure structural integrity and the proper performance of the integrated WRB.
The ZIP System aims to simplify the construction of a building's exterior envelope by combining multiple components into one product. This integrated approach is intended to reduce the number of steps required on-site, minimize the potential for installation errors, and enhance the overall performance of the roof deck. The system's design contributes to a more robust and energy-efficient building enclosure by creating a continuous air and water barrier.
- Homepage
- Products
- Specifications
- Instructions
- About Us
- Video
- Product Availability and Pricing Click here for details
-
Similar Products
- See all our Roofing products.